How to Fix Automatic Repair Loop in Windows 10 Easily

If you are facing an Automatic Repair Loop issue on your Windows 10, then read more to know How to Fix the Automatic Repair Loop in Windows 10.

Hello! Everyone, How are you all, Hope all are doing great, First of all, Heartily inviting you to the article, Here we are ready to discuss how to fix the Automatic Repair Loop on Windows 10, people who are facing the issue of automatic repair loop on Windows 10 and wants to know the reasons behind the issue and fixing methods to solve this issue for that type of people you’re at the right place and this article is the best reference to know

In this article, we are clearly discussing the fixing methods o fix the Automatic Repair Loop on Windows 10 and also tell the causes behind the issue and basic information of Automatic Repair Loop the methods are easy and simple you can easily go through them there is no doubt and difficulties while accessing the methods.

Introduction to Automatic Repair:

Automatic Repair is one of the excellent Windows inbuilt features that is usually designed to fix the issues related to boot and also the problem that arises automatically during the startup and most of the cases the Automatic Repair Loop error is due to lack of reboot, so you must, again and again, reboot the device.

It is a perfect windows system-recovery tool that identifies the troubleshoots common boot errors in Windows 8 and above systems, this tool is automatically triggered whenever the system fails to boot the back to back attempts, behalf of fixing the boot issues in some cases the automatic repair tool goes to the endless reboot loop.

Also Read:

• Install and Run Android Apps on Windows 11
• Download and Install Apple Music on Windows 11 PC
• How Can I Fix Reboot And Select Proper Boot Device Error in Windows
• Fix Windows Modules Installer Worker High CPU Issue [Solved]

Causes of Automatic Repair Loop:

Some reasons behind the cause of Automatic Repair Loop are

• Lack of update.
• Corrupted system files
• Windows Boot Manager file corruption
• Incompatible hard drives

Methods to Fix Automatic Repair Loop in Windows 10 Easily

1. Run Fixboot and Chkdsk Commands
2. Disable/Turn Off Automatic Repair Tool
3. Restore the Windows Registry
4. Enable Safe Mode to perform System Scan
5. Reset Windows 10
6. Reinstall Windows 10

Method #1: Run Fixboot and Chkdsk Commands

In order to fix the Automatic Repair Loop on Windows 10, you must use some system repair tools they are Fixboot and Chkdsk commands these are helpful to begin the low-level check of the system drive and also fix the errors by using the Check Disk utility, in case if identifies any error then it automatically repair it.

If Windows is unable to boot then you must force Windows to boot the Command Prompt Windows with the help of the Advanced options menu screen.

Follow the below simple steps in order to fix the Automatic Repair Loop on Windows 10

• First of all, the user must restart the PC.
• Then after pressing the F8 key on the keyboard before the display of the Windows logo and the spinning icon this is due to the Windows boot troubleshooting menu.
• Now choose to See Advanced Repair Options to start.

• In the Choose an option screen, simply choose Troubleshoot.

• Next, click on Advanced options and then Command Prompt.

• On the Command Prompt Window, enter the following command and then Hit Enter

chkdsk c: /r

• In case the chkdsk command fails then you must try to use the Fixboot command.
• On the same Command Prompt you need to type the following command and press Enter

fixboot c:

• After completion of all the steps, you must exit from the Command Prompt Windows by pressing the Cross(X) icon and Finally Restart the Device.

At last check the device whether it fixes the issue or not, if not then jump to another method

Method #2:Disable/ Turn Off Automatic Repair Tool

This is also one of the effective methods to fix the Automatic Repair Loop on Windows 1o, simply the user must disable the Automatic Repair Tool feature on Windows 10, to do this you must follow some simple steps

With the help of this it allows the user to boot the Windows without using a repair loop, this process is only applicable whenever the Windows system works properly

• Initially, launch the Windows boot Troubleshooting menu.
• Then choose to See advanced repair options

• Now select Troubleshoot and then Advanced options.

• Next, navigate to Command Prompt.

• The user must enter the following command and then hit Enter

 bcdedit

• After that you must check the values for identifier and for recovery enabled, the identifier value must be {default} and the recovery enabled must be Yes.
• Next enter the following command and press Enter

bcdedit /set {default} recoveryenabled no

• It will disable the automatic boot repair, in case the command doesn’t work properly then you must try another command i.e

bcdedit /set {current} recoveryenabled no

• Once the above steps are successfully completed then Enter Exit and hit Enter and you must restart the PC to apply the changes.

Method #3: Restore the Windows Registry

In some cases, the issue is due to malware infections or disk issues and also because of the end up corrupting files on the registry. if you want to fix the registry issues then you must restore the registry for that you must follow the below simple steps carefully.

• First of all, open the Windows boot troubleshooting menu.
• Then click on See advanced repair options and then Troubleshoot.

• Next, tap on Advanced options and then Command Prompt.

• The user must enter the following command and then Hit Enter

C:\Windows\System32\config\regback* C:\Windows\System32\config\

• If the user is asked to overwrite files then enter All and Press Enter on the keyboard
• After completing all the steps, simply restart the device and check whether the issue is solved or not.

Must Read:

• Fix Windows Could Not Automatically Detect This Network’s Proxy Settings
• Ways to Backup Data From Mac Using Time Machine Backup
• Why is My Bluetooth Not Working on Mac OS
• Is It Possible to Change the IP Address on Any Device

Method #4: Enable Safe Mode to perform System Scan

Safe Mode is the problem-solving mode of Windows, with the help of this you can easily fix the system-related issues by uninstalling/ updating the incompatible software driver and also deleting the problematic files, removing viruses, and much more

In case the system repair tools find any corrupted files then the Windows will replace the files with a local image, the image is also corrupted then the Windows is unable to repair itself and results to fail the commands, for repairing this we are using the DISM tool i.e Deployment Image Servicing and Management tool

Before going to use this the user must enable the Safe Mode, it will launch the basic version of Windows without using any third-party programs in order to fix the start-up errors

• Initially, Restart the PC and then press the F8 key during booting to launch the Windows boot troubleshooting menu
• Then choose to See advanced repair options.

• Now click on Troubleshoot and then Advanced options.

• Next tap on Startup Settings.

• After that click on Restart.
• The user can notice so many restart options, select Enable Safe Mode with Networking by pressing the F5 key on the keyboard.
• After Windows boots up in the Safe Mode the user must right-click on the Start Menu and then choose Windows PowerShell(Admin).
• On the PowerShell windows enter the following command and then press Enter

DISM /Online /Cleanup-Image /RestoreHealth

• It takes some time to complete while the DISM tool completes running.
• You must Reboot/ Restart the PC and follow the onscreen instructions to launch PowerShell windows on the Safe Mode again.
• Now you must enter the following command and then hit Enter

sfc /scannow

• It will check the integrity of Windows system files and then allow the user to verify the Windows is completely repaired.

Method #5: Reset Windows 10

If you try the above methods and still facing the issue then you must Reset the Windows 10, it will help to fix the automatic repair loop and reset the Windows 10, the user is not bothered about the loss of data and files you didn’t lose any data, before going to reset the device the user must select whether you want a clean reset by deleting everything or Preserve the files.

For resetting windows 10 the user must follow some simple steps.

• On the Windows Boot troubleshooting menu, you must choose Troubleshoot.

• Then click on Reset this PC.

Or

• On the Preparing Automatic Repair Windows, you must press and hold down the Power button three times.
• Then it forces to shut down the device.
• The system will launch the boot repair page after two to three times of restarts.
• You must refresh the PC in order to fix the automatic repair loop.
• Next, select Troubleshoot and then navigate to Refresh PC or Reset PC.

• You must follow the instructions that are displayed on the screen to finish the resetting of the PC

Method #6: Reinstall Windows 10

If you are still facing the issues related to Automatic Repair Loop then you must reinstall the Windows this will help to create a fresh environment and fixes all the bugs related to the system and others.

The user can use Windows installation media or else Download the latest Windows 10 update in order to fresh install or reinstall Windows 10 on PC.

To reinstall Windows 10, follow the below simple steps carefully

• On Windows, navigate to Start Menu.

• Then move to Settings.

• In that select Update & Security tab.

• Now click on Recovery.

• Then select Get Started below the Reset this PC.

• Then it shows the reinstall options for the entire drive.
• You must click on Remove Everything to confirm a clean reinstall.

Related Articles:

• Explain the Methods to Fix Zoom Update Not Installing on Mac
• How Can I Fix the iOS Location Services Not Working Issue
• Steps to Reset the Forgot Apple Watch Passcode

Frequently Asked Questions?

• Question 1) How to Fix the Automatic Repair Loop on Windows 10 Without using Disc?

Answer: Without using the Disc the user can fix the Automatic Repair Loop on Windows 10, follow the below steps

1. Check the Boot Priority in BIOS
2. Remove the Laptop Battery
3. Reconnect the Hard drive
4. Remove the RAM
5. Change or Modify the Disk controller mode in BIOS
6. Enable/ Turn On NX, XD or XN in BIOS
7. Perform Reinstallation
8. Remove additional Connected USB drives

• Question 2) How to Fix Automatic Repair Loop Error on Black Screen

Answer: If you are getting an error message on a black screen then try these steps to fix it

1. Boot the device in Safe Mode
2. Disable/ Turn Off the Automatic Repair
3. Move to the extra mile, configure automatic backups on Windows 10

• Question 3) How much time is taken by Windows to repair the loop?

Answer: It takes just a few seconds to a few minutes in order to repair the loop, simply tap on the Startup Repair option then it will perform its task.

Conclusion:

This article clearly discuss the basic information of Automatic Repair Loop on Windows and explains the causes behind the Automatic Repair Loop not working and briefly explains the fixing methods to fix the Automatic Repair Loop on Windows 10

For people who are searching for the methods to fix the Automatic Repair Loop on Windows 10 for that type of person, this article is the best reference and guide to know.

Thank you for reading this article, I hope this article is helpful to you for more updates and information, visit and follow our site omgeeky